SPECIAL ORDER ONLY!
Machine Information
Cincom R SERIES
Maximum machining diameter ∅ 4 mm – The R04 CINCOM is compact and has a maximum machining diameter of ∅ 4 mm. It specializes in machining small-diameter parts, thus offering a wider range of high-precision work pieces for specialized parts.
Cincom R04 means rapid progress with high tolerance and productivity, while utilizing very little space.
SUPER HIGH-SPEED TURNING
The new main spindle and chucking mechanism results in state-of-the-art, super high-speed turning resulting in greatly reduced machining time.
NEW SLIDE STRUCTURE
CITIZEN developed the optimum slide structure for machining tiny parts. The new slide is driven by a linear motor, without any deflection and backlash from power transmission, resulting in the highest-speed, the highest response and making the least noise. Moreover, equipped with two independently driven gang tool posts, the Cincom R04 processes as a Cam-lathe.
COMPACT AND EFFICIENT DESIGNING
The CITIZEN R04 requires half the space of a B12, due to the design of the built-in spindle and linear motor. Productivity space per unit is drastically improved.
Functions
Standard NC functions
- NC unit dedicated to the R series
- Automatic power off function
- 7” monochrome LCD display
- Tool offset pairs: 16
- Display language
- Macro dedicated to the R series
- Axis control group count: 5
- Background editing
- Input code: ISO
- Input/output interface: RS232C/PC card
- Command input: incremental or absolute
- Operating time display
- Feed command: millimeters per revolution feed or millimeters per minute feed
- Product counter: Up to 8 digits
- Zero-point return function
- Manual feed function
- Automatic return to return position
- Self-diagnostic function
- Automatic return to queuing position
- Program storage capacity equivalent to 20m
- Automatic return to the start position
- Alarm history display
- On-machine program check function
- Main spindle 15° index
Functions
Optional NC functions
- Program storage capacity
- 1° indexing, main, back Equivalent to 40m of tape
- Canned cycle for drilling Equivalent to 80m of tape
- Tool noise radius compensation Equivalent to 120m of tape
- Continuous thread cutting
- Corner chamfer/round function
- Synchronous tapping
Accessories
Standard Accessories
- Main spindle chuck
- Chasing device
- Workplace separator
- Stand-alone coolant tank with level sensor
- Stationary guide bushing device
- Door switch
Accessories
Optional Accessories
- Stationary guide bushing device with
- Cutoff tool breakage detector open/close function
- Coolant flow rate detector
- Bar loader
- Workpiece unloading device
- Small 4-division separator
- Patrol lamp indicator
- Chip conveyor
- Illuminator
Cincom R SERIES
MACHINE SPECIFICATIONS
| ITEM | R04 |
|---|---|
| Maximum machining diameter (D) | Ø4mm |
| Maximum machining length (L): Fixed guide bushing | 40mm |
| Maximum machining length (L): Rotary guide bushing | — |
| Maximum front drilling diameter | Ø3mm |
| Maximum front tapping diameter (tap) | M3 |
| Spindle through-hole diameter | Ø9mm |
| Main spindle speed: Fixed guide bushing | 20,000 rpm (rating: 16,000 rpm) |
| Main spindle speed:Rotary guide bushing | — |
| For the gang rotary tool: Maximum drilling diameter | Ø2mm |
| For the gang rotary tool:Maximum tapping diameter | M2 |
| For the gang rotary tool:Spindle speed | 8,000 rpm (part: 6,000 rpm) |
| Max. chuck diameter of back spindle | Ø4mm |
| Max. protrusion length in back machining process | 40mm |
| Max. drilling diameter in back machining process | Ø2mm |
| Max. tapping diameter in back machining process | M2.6 |
| Back spindle speed | 10,000 rpm |
| Number of tools to be mounted | 13 |
| Turning tools on the gang tool post | 5 |
| Cross rotary tools on the gang tool post | 2 |
| Tools for front drilling | 3 |
| Tools for back drilling | 3 |
| Tool size: Tool (gang tool post) | □8mm |
| Tool size: Sleeve | Ø15.875mm |
| Motors: Spindle drive | 0.75 / 1.1 kW |
| Motors: Back spindle drive | 0.5 kW |
| Motors: Tool spindle on the gang tool post | 0.2 kW |
| Motors: Coolant oil | 0.18 kW |
| Motors: Lubricating oil | 0.00 3kW |
| Center height | 1,000mm |
| Rated power consumption | 4kVA |
| Weight | 950kg |