In addition to the 5 turning tools, the B12VI also comes with 3 live cross tools and 4 front/back ID tools. This is the standard machine for the US market.
Reduced Machining, NC Operation and Tool Replacement Time
Multi-axis control system for extremely fast data processing
All operations directly controlled by the NC using a completely electronic full servo system
Machining with higher precision is assured even in lengthy operations without being affected by the thermal displacement of a ball screw
A built-in servo motor with an integrated ball screw realizes high speed, fast response operation of the feed system
Tool layout not constrained by machine structure reduces setup and tool replacement times
Cincom B12EVI
Additional Details
100% Servo Equipped
Less downtime – eliminates belts, hydraulics, pressure switches, pneumatics, solenoids and other high maintenance components
Shorter cycle times than CAMs
-Faster rapid traverses and spindle speeds
-Quicker acceleration and deceleration times
-Shorter chip-to-chip times and chuck open/close times
40% less floor space
Improved back spindle functionality
Synchronous rotation with main spindle
Front and back work performed simultaneously
S4-digits direct command transmission to 7,000 rpm
0.5 kw motor for excellent acceleration and deceleration
Back spindle has same electrical chuck as front spindle
May be opened and closed as needed, eliminating limitations of a conventional CAM drive
Easy, Safe Operation
Quick, easy, safe way to prove out new programs
Reviews operation in forward and reverse for accurate program editing
Increased reliability due to reduced number of parts
Minimum maintenance and attendance
Quiet Integral Drive Spindle
Drive spindle built-in and fully enclosed
Reduced vibration and noise
Sealed unit enables use of water soluble cutting oil
Parts
Typical Parts
For parts up to .47″ diameter × 5.31″ long per chucking.
- Contouring
Threading
End Work
– Drilling
– Tapping
– Reaming
– Boring
Cincom B12EVI
MACHINE SPECIFICATIONS
| ITEM | B12EVI |
|---|---|
| Max. machining diameter | .47″ |
| Max. machining length (per chucking) | 5.31″ |
| Main spindle motor | 1.5/2.2 KW |
| Main spindle speed | 100-12,000 rpm |
| Back spindle speed | 100-7,000 rpm |
| Number of Tools: Cutting | 5 |
| Number of Tools: Rotary | 3 |
| Number of Tools: Front Drilling | 4 |
| Number of Tools: Back Drilling | 4 |