THY
Three Y axes give high efficiency and high productivity
Right and left upper turrets equipped with a Y axis, and a lower turret also with a Y axis that can unrestrictedly approach both spindles, enable the ideal process allocation and flexible tooling without any limitations imposed by machining balance.
High rigidity and high torque with 40 Nm revolving tools
The use of rigid 40 Nm revolving tool drives capable of heavy cutting ensures stable milling. Three turrets with a total of 36 tool positions handle complex machining just like a machining center.
SYY
Cutting time shortened by simultaneous cutting at left and right with two Y axes.
The ability to machine simultaneously at the left and right spindles using the upper and lower turrets, both featuring a Y-axis function, means that complete front and back machining of products with complex shapes can be accomplished simply and in a short time.
High rigidity and high torque with 40 Nm revolving tools
The use of rigid 40 Nm revolving tool drives capable of heavy cutting ensures stable milling. Two turrets with a total of 24 tool positions handle complex machining just like a machining center.
NC SPECIFICATIONS
ABX-THY2 | FS.31i-B 3 system
Axial control
HD1: X1,Z1,Y1,C1,A1,E1(T1), HD2: X2,Z2,Y2,(C2),A2,E2(T2), HD3: X3,Z3,Y3,C3,A3,E3(T3),PC,ZS
Minimum setting unit
0.001mm, 0.0001inch, 0.001deg
Interpolation functions
G01, G02, G03
Thread cutting
G32, G33, G92
Rapid feed override
0-100%
Feed rate override
0-150%
Feed rate per minute/Feed rate
G98/G99
Single form fixed cycle
G90, G92, G94
Program storage capacity
The sum total of 3 systems : 128 KB (320 m)
Registered program number
The sum total of 3 systems : 250 programs
Spindle function
S4 digit
Constant surface speed control
G96
Tool function
T AABB (AA = Tool number and geometry, BB = Wear offset number)
Tool compensation number
32 pieces, 96 pieces (3 systems)
Data input-and-output function
RS -232C, Memory card interface
Automatic operation
Single-cycle automatic operation, Single block, Block delete, Machine lock, Optional block skip, Dry run, Feed hold
Others
10.4″ color LCD, Feed axis absolute position detection unit, Synchronization / mixture control, Cs outline control, Many article thread cutting, Continuation thread cutting, Polar coordinate interpolation, A decimal point inputProgrammable date input G10, Automatic coordinate system setup, Custom macro, Program protection, Manual handle retrace, Self-diagnostic function, etc.
NC SPECIFICATIONS
ABX-SYY2 | FS.31i -B 2 system
Axial control
HD1: X1, Z1, Y1, C1, A1, E1 (T1), (ZS), HD2: X2, Z2, Y2, C2, A2, E2 (T2), PC, ZS
Minimum setting unit
0.001 mm, 0.0001 inch, 0.001 deg
Interpolation functions
G01, G02, G03
Thread cutting
G32, G33, G92
Rapid feed override
0-100%
Feed rate override
0-50%
Feed rate per minute/Feed rate
G98/G99
Single form fixed cycle
G90, G92, G94
Program storage capacity
The sum total of 2 systems : 64 KB (160 m)
Registered program number
The sum total of 2 systems : 125 programs
Spindle function
S4 digit
Constant surface speed control
G96
Tool function
T AABB (AA = Tool number and geometry, BB = Wear offset number)
Tool compensation number
32 pieces, 64 pieces (2 systems)
Data input-and-output function
RS -232C, Memory card interface
Automatic operation
Single-cycle automatic operation, Single block, Block delete, Machine lock, Optional block skip, Dry run, Feed hold
Others
10.4″ color LCD, Feed axis absolute position detection unit, Synchronization / mixture control, Cs outline control, Many article thread cutting, Continuation thread cutting, Polar coordinate interpolation, A decimal point input Programmable date input G10, Automatic coordinate system setup, Custom macro, Program protection, Manual handle retrace, Self-diagnostic function, etc.
Specifications
Machine Specifications
Other Specifications Include:Pneumatic, Spindle brake, Revolving tools and driving unit, Thermo revision, Spalsh guard interlock, High pressure coolant,Parts catcher (Servo type).
Optional accessories: 100V, Collet chuck system, 6″ Power chuck, Air blow, No.2 spindle inner high pressure coolant & air blow, Coolant level switch, Automatic power shut-off and extinguisher, Automatic power shut-off, Chip conveyor, Chip box, Parts carrier, Coolant mist collector, Blast-proof dumpers, Tool setter, Signal light (3 steps), Total & preset counter, Bar feeder interface, Spindle inner bushing, Drill breakage detector, Work ejector No2, etc.
| Item | ABX-51THY2 | ABX-64THY2 | ABX-51SYY2 | ABX-64SYY2 |
|---|---|---|---|---|
| Maximum work length SP1 | 125 mm | 118 mm | 125 mm | 118 mm |
| Maximum work length SP2 | 125 mm | 125 mm | 125 mm | 125 mm |
| Maximum work diameter for bar work SP1 | 51 mm Dia. | 64 mm Dia. | 51 mm Dia. | 64 mm Dia. |
| Maximum work diameter for bar work SP2 | 51 mm Dia. | 51 mm Dia. | 51 mm Dia. | 51 mm Dia. |
| Maximum work diameter for power chuck SP1 | 165 mm Dia. | — | 165 mm Dia. | — |
| Maximum work diameter for power chuck SP2 | 165 mm Dia. | 165 mm Dia. | 165 mm Dia. | 165 mm Dia. |
| Number of spindles | 2 | 2 | 2 | 2 |
| Spindle speed SP1 | 50-5,000 min-1 | 40-4,000 min-1 | 50-5,000 min-1 | 40-4,000 min-1 |
| Spindle speed SP2 | 50-5,000 min-1 | 50-5,000 min-1 | 50-5,000 min-1 | 50-5,000 min-1 |
| Inner diameter of draw tube SP1 | 52 mm Dia. | 65.5 mm Dia. | 52 mm Dia. | 65.5 mm Dia. |
| Inner diameter of draw tube SP2 | ∅52 mm | ∅52 mm | ∅52 mm | ∅52 mm |
| Chucking system SP1, SP2 | Hydraulic cylinder | Hydraulic cylinder | Hydraulic cylinder | Hydraulic cylinder |
| Type of collet chuck SP1 S collet system | H-S22 / DIN177E | H-S26 / DIN185E | H-S22 / DIN177E | H-S26 / DIN185E |
| Type of collet chuck SP2 S collet system | H-S22 / DIN177E | H-S22 / DIN177E | H-S22 / DIN177E | H-S22 / DIN177E |
| Type of Power chuck SP1, SP2 | 6″ Hydraulic chuck Turret | 6″ Hydraulic chuck Turret | 6″ Hydraulic chuck Turret | 6″ Hydraulic chuck Turret |
| Type of Power chuck SP1, SP2 | 3 | 3 | 2 | 2 |
| Tool shank size HD1, HD2, HD3 | 20 mm Sq. | 20 mm Sq. | 20 mm Sq. | 20 mm Sq. |
| Tool shank size HD1, HD2, HD3 | 20 mm Sq. | 20 mm Sq. | 20 mm Sq. | 20 mm Sq. |
| I.D tool hole size HD1, HD2, HD3 | 25 mm Dia. / 40 mm Dia. | 25 mm Dia. / 40 mm Dia. | 25 mm Dia. / 40 mm Dia. | 25 mm Dia. / 40 mm Dia. |
| Index time HD1, HD2, HD3 | 0.25 SEC/1POS | 0.25 SEC/1POS | 0.25 SEC/1POS | 0.25 SEC/1POS |
| Rapid traverse rate HD1 X1 | 16 m / min | 16 m / min | 16 m / min | 16 m / min |
| Z1 | 20 m / min | 20 m / min | 30 m / min | 30 m / min |
| Y1 | 12 m / min | 12 m / min | 12 m / min | 12 m / min |
| HD2 X2 | 16 m / min | 16 m / min | 16 m / min | 16 m / min |
| Z2 | 20 m / min | 20 m / min | 30 m / min | 30 m / min |
| Y1 | 12 m / min | 12 m / min | 12 m / min | 12 m / min |
| HD3 X3 | 16 m / min | 16 m / min | — | — |
| Z3 | 20 m / min | 20 m / min | — | — |
| Y3 | 12 m / min | 12 m / min | — | — |
| SP2 Zs | 30 m / min | 30 m / min | 30 m / min | 30 m / min |
| Revolving tool (Option) – Number of revolving tools HD1, HD2, HD3 | 12 (MAX.36) | 12 (MAX.36) | 12 (MAX.24) | 12 (MAX.24) |
| Maximum spindle speed | 6,000 min-1 | 6,000 min-1 | 6,000 min-1 | 6,000 min-1 |
| Machining capacity Drilling | MAX. 20 Dia. | MAX. 20 Dia. | MAX. 20 Dia. | MAX. 20 Dia. |
| Tapping | MAX. M14×2 | MAX. M14×2 | MAX. M14×2 | MAX. M14×2 |
| End mill | MAX. ∅16 | MAX. ∅16 | MAX. ∅16 | MAX. ∅16 |
| Hydraulic tank capacity | 10 L | 10 L | 10 L | 10 L |
| Lubricating tank capacity | 4 L | 4 L | 4 L | 4 L |
| Coolant tank capacity | 400 L | 400 L | 400 L | 400 L |
| Machine height | 2,222 mm | 2,222 mm | 2,222 mm | 2,222 mm |
| Floor space | 3,290 × 2,204 mm | 3,290 × 2,204 mm | 3,290 × 2,204 mm | 3,290 × 2,204 mm |
| Machine weight | 11,350 Kg | 11,350 Kg | 10,900 Kg | 10,900 Kg |
| Spindle motor SP1 | AC 15 / 11 Kw | AC 15 / 11 Kw | AC 15 / 11 Kw | AC 15 / 11 Kw |
| Spindle motor SP2 | AC 7.5 / 5.5 Kw | AC 7.5 / 5.5 Kw | AC 7.5 / 5.5 Kw | AC 7.5 / 5.5 Kw |
| Revolving tool motor HD1, 2, 3 | AC 4.5 Kw | AC 4.5 Kw | AC 4.5 Kw | AC 4.5 Kw |
| Voltage | AC 200 / 220 V ± 10% 50 / 60Hz ± 1Hz | AC 200 / 220 V ± 10% 50 / 60Hz ± 1Hz | AC 200 / 220 V ± 10% 50 / 60Hz ± 1Hz | AC 200 / 220 V ± 10% 50 / 60Hz ± 1Hz |
| Capacity | 49 KVA | 49 KVA | 48 KVA | 48 KVA |
| Air supply | 0.5 MPa (5 kgf / cm2) | 0.5 MPa (5 kgf / cm2) | 0.5 MPa (5 kgf / cm2) | 0.5 MPa (5 kgf / cm2) |
| Fuse | 150 A | 150 A | 150 A | 150 A |